OKADORA Standard Type
Batch Type
Flow Chart
Drawing
Specifications
| Diameter (mm) |
Shell Height (mm) |
Heat Surface (m2) |
Power(kw) | Material for main parts |
|||
|---|---|---|---|---|---|---|---|
| Shell | Blower | Discharge Screw |
|||||
| SD-800C-B | 800 | 800 | 1.5 | 7.5 | 3.7 | 0.75 | SUS310S SUS316 |
| SD-950C-B | 950 | 1,000 | 2.0 | 11 | 5.5 | 0.75 | SUS310S SUS316 |
| SD-1200C-B | 1,200 | 1,200 | 3.0 | 15 | 7.5 | 0.75 | SUS310S SUS316 |
Specifications for Furnace of Deodorant & Hot Air Generation
| Model | For type of carbonizer |
Diameter (mm) |
Shell Height (mm) |
Material for main parts |
Burner output (Kcal/Hr) |
|---|---|---|---|---|---|
| TH-450 | SD-800C-B | 450 | 3,000 | SUS310S | 100,000 |
| TH-500 | SD-950C-B | 550 | 3,000 | SUS310S | 150,000 |
| TH-600 | SD-1200C-B | 700 | 4,000 | SUS310S | 200,000 |
| Model | Power(kw) | Applicable fuel | ||
|---|---|---|---|---|
| Burner | Secondary blower |
Compressor | ||
| TH-450 | 0.2 | 0.4 | 0.75 | Town gas, LPG |
| TH-500 | 0.2 | 0.4 | 0.75 | Town gas, LPG |
| TH-600 | 0.4 | 1.0 | 0.75 | Heavy oil, Kerosene, Town gas, LPG |
Carbonizer Throughput Batch Type (kg/4 hours batch)
| Model | Ingredient | Medical Wastes |
Waste Plastic |
Rubbish (incld. Raw Garbage) |
Raw Garbage |
Sludge | |
|---|---|---|---|---|---|---|---|
| Nominal Gravity(kg/l) |
0.1 | 0.15 | 0.5 | 0.8 | 0.9 | ||
| Water Content (%) |
Less 10 | Less 10 | 40 | 60 | 85 | ||
| SD-800C-B | Through put |
（kg） | 25 | 25 | 50 | 60 | 60 |
| （l） | 250 | 165 | 100 | 75 | 70 | ||
| SD-950C-B | Through put |
（kg） | 50 | 50 | 115 | 135 | 135 |
| （l） | 500 | 330 | 230 | 170 | 150 | ||
| SD-1200C-B | Through put |
（kg） | 75 | 75 | 150 | 180 | 180 |
| （l） | 750 | 500 | 300 | 225 | 200 | ||
Fuel Consumptions (Subjects to vary on the type of ingredients)
| Model | Fuel Consumption |
Medical Waste |
Waste Plastic |
Rubbish (incld. raw garbage) |
Raw Garbage | Sludge |
|---|---|---|---|---|---|---|
| SD-800C-B | kg/Hr (Heavy oil conversion value) |
2.5 | 2.5 | 3.0 | 4.5 | 5.0 |
| SD-950C-B | 5.0 | 5.0 | 6.0 | 10.0 | 11.0 | |
| SD-800 | 7.0 | 7.0 | 9.0 | 13.5 | 15.0 |
